在我們使用氣動球閥的過程中，可能出現氣動球閥泄露現象，那么出現這一現象的原因是什么，如何解決泄露問題，下面斯凱浮閥門小編為您整理相關說明內容。首先球煙密封處可能因?yàn)闅鈩?dòng)球闊密封國連接螺紋、螺釘、壓國松動而出現池露，此外，可能因?yàn)闅鈩?dòng)球詞的密封國與本體焊接，堆濕質量差導致其泄露，氣動球詞座封國連接而被腐坤也會導致其密封泄露，最后，氣動球閥密封國輾壓不嚴也是可能導致其泄露的原因之一。一般導致氣動球閥密封處的泄露的原因就是這些，那么有何解決方法呢?首先，卸下螺絲，清理壓圍，更換破損零件，打磨密封和連接座密封面，重新組裝。對于銹飩損壞較大的要件，可采用煤接、粘接等方法修復;氣動球凋密封國應校施悍規范進行修補。堆焊不能再焊時，應清除原堆焊加工的密封國連接面被腐蝕，可用研磨、粘接等方法修補，不能再焊時，應更換密封國;氣動球閥密封輾壓漏點應用膠粘劑再碾壓固定。

　　In the process of using pneumatic ball valves, there may be leakage of pneumatic ball valves. What are the reasons for this phenomenon and how to solve the leakage problem? Below, the SKF Valve editor will summarize the relevant instructions for you. Firstly, there may be pool leakage at the sealing point of the ball smoke due to loose threads, screws, and compression of the pneumatic ball seal. In addition, it may be caused by poor moisture accumulation due to welding between the sealing state of the pneumatic ball joint and the body, and corrosion of the sealing state connection of the pneumatic ball joint seat, which can also lead to sealing leakage. Finally, loose compression of the sealing state of the pneumatic ball valve may also be one of the reasons for its leakage. What are the common causes of leakage at the sealing of pneumatic ball valves? So, what are the solutions? Firstly, remove the screws, clean the pressure ring, replace damaged parts, polish the sealing and connecting seat sealing surfaces, and reassemble. For components with significant rust damage, methods such as coal bonding and adhesive bonding can be used for repair; Pneumatic ball seals should be repaired according to the national standards. When welding is no longer possible, the sealing joint surface of the original welding process should be removed and corroded. It can be repaired by grinding, bonding, or other methods. If welding is no longer possible, the sealing joint should be replaced; The sealing and rolling leakage points of pneumatic ball valves should be fixed with adhesive and then rolled.

　　本文由 上海良工閥門山東銷售處   友情奉獻.更多有關的知識請點擊  http://m.258kmw.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Shanghai Lianggong Valve Shandong Sales Office For more related knowledge, please click http://m.258kmw.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.